IWON : Autos : 2torials : Install and Remove Snow Chains Powered by learn2.com
2TORIAL
Learn2 Install and Remove Snow Chains (continued)
Step 7: Remove the chains

When the road becomes clear of snow, ice, sand, etc., pull over and remove the chains. Do not drive with chains on pavement. The steps are the same as above, but in reverse order.

     
  • Pick a spot where other cars can see and avoid you.

  • Apply the parking brake!

  • Unclip the rubber loops.

  • Unhook the inside and outside chains. Pick the chains off the tire and lay straight out on the ground.

  • Drive four or five feet, until the tires are completely off the chains.

  • Put chains and rubber loops back in their box. Be careful where you put them down. They're probably wet and could rust, or damage fabrics.

  • Happy motoring! Drive away carefully and be aware of other motorists on the road.

-end-

 Previous Step

MORE TUTORIALS
Understand Tire Care
Wax a Car
Lease a Car
Flush a Car Radiator
 More 2torials...

 Click here to email this page to a friend  

2TORIAL STEPS
Introduction
Step 1: Pull out the chains
Step 2: Lay 'em on the line
Step 3: Drive-up
Step 4: Hook 'em up
Step 5: Clip them down
Step 6: Start out slow...
Step 7: Remove the chains

 OTHER 2TORIALS AND LEARNLETS
2torials:
Learnlets:
Autos
Travel
Food & Drink
Business
Parenting
Autos
Travel
Food & Drink

 AUTOS LEARNLETS
Save Money on Auto Parts
Troubleshoot Your Vehicle's Air Conditioner
Remove a Sticker from a Car
Understand Tire Labels
 More Learnlets...


]